background image

 
 

 

Wireless Doorbell            

10566

 

Instructions for Use 

Please read and retain these instructions for future reference

 

v002:30/03/17 

 

3. Music/Chime Selection 

There are 52 different ring tones. You can pair your receiver and re-select the music at the same time as 
performing the next step (4). 

 

4. Pairing (matching) a Receiver with transmitter 

 

a.

 

Press Music change button to choose a ring tone. 

b.

 

After selecting the ring tone, press the volume change button and hold for 5 seconds until the 
receiver starts flashing and making a sound. Press the transmitter button for 3 seconds, the 
transmitter LED light will light up, the receiver and transmitter are paired and the ring tone is 
changed. 

c.

 

Clear settings: Press music change button on the receiver and hold for 5 seconds until it makes 
a sound. The ring tone will be restored to default ring tone (Ding Dong). 

 

WARNING 

 

CHECK THE APPLIANCE CAREFULLY FOR DAMAGE BEFORE EACH USE. 

 

KEEP THE APPLIANCE AWAY FROM CHILDREN.  

 

BEFORE CONNECTING THE APPLIANCE, CHECK IF THE VOLTAGE INDICATED ON THE BOTTOM OF 
THE APPLIANCE IS IN ACCORDANCE WITH THE MAINS VOLTAGE IN YOUR HOME. 

 

DO NOT USE IF THE APPLIANCE OR PLUG IS DAMAGED. TO BE REPAIRED BY A QUALIFIED 
ELECTRICIAN OR TO BE REPLACED BY THE MANUFACTURER, SERVICE AGENT OR SIMILARLY 
QUALIFIED PERSON, IN ORDER TO AVOID A HAZARD. 

 

CARE AND CLEANING INSTRUCTIONS 

 

Always switch off and unplug before cleaning. 

 

Do NOT immerse in water. Risk of electric shock. 

 

Do NOT use abrasive cleaners or sharp utensils to clean this appliance. 

 

Wipe surfaces with a soft dry cloth. 

 

Allow to dry thoroughly before further use.  

 

Store the unit in a cool, dry place.

 

 
BATTERIES  

 

Keep batteries away from children and pets. 

 

Do not mix used and new batteries. 

 

Remove the batteries if left for long periods. 

 

Never dispose of batteries in a fire.  

 

Battery disposal, spent or expired batteries must be properly disposed of and recycled in 
compliance with local regulations. For detailed information, contact your local authority. 

 

Follow the battery manufacturer’s safety, usage, and disposal instructions. 

 

DISPOSAL 

 

Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your local 
recycling regulations.  

 

At the end of the product’s lifespan please dispose of it at an authorised 
household WEEE waste recycling centre. 

 

      

Summary of Contents for 10566

Page 1: ... INSTRUCTIONS BEFORE USE TO PROTECT AGAINST ELECTRIC SHOCK DO NOT IMMERSE PLUG OR APPLIANCE IN WATER OR ANY OTHER LIQUID UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED PLUG OR AFTER THE APPLIANCE MALFUNCTIONS OR HAS BEEN DAMAGED IN ANY WAY THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY CAUSE INJURIES AND INVALIDA...

Page 2: ...t whether you have selected the correct operating range and prepare an electric drill cross screwdriver and flat blade screwdriver before installation 3 Please do not install the transmitter on metal doors or doorframes If the signal is not picked up please change the installation location of the transmitter 4 Please install the receiver away from induction cookers televisions and other appliances...

Page 3: ... operating range between transmitter and receiver Prepare a flat area where you intend to install the transmitter 2 Tear off one side of the double sided adhesive sticker Stick the transmitter onto the wall and press it for 10 seconds Please note that the adhesive sticker will have poor adhesion if put on dirty or uneven surface Sunlight or rain will affect the adhesion and may cause the transmitt...

Page 4: ...PLIANCE IS IN ACCORDANCE WITH THE MAINS VOLTAGE IN YOUR HOME DO NOT USE IF THE APPLIANCE OR PLUG IS DAMAGED TO BE REPAIRED BY A QUALIFIED ELECTRICIAN OR TO BE REPLACED BY THE MANUFACTURER SERVICE AGENT OR SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD CARE AND CLEANING INSTRUCTIONS Always switch off and unplug before cleaning Do NOT immerse in water Risk of electric shock Do NOT use abrasiv...

Reviews: