Combination Lock
G857
Instructions for Use
Please read and retain these instructions for future reference
v001: 27/05/20
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
TO OPEN
Rotate all 4 dials to the pre-set combination along the centre line.The pre-set factory combination is 0-0-0-0.
Set your own combination
On the end of the locking bolt, fully depress the small silver
button.
Whilst holding in the pin, rotate the 4 dials to your desired
code.Ensure the numbers are positioned centrally and have
clicked into position.
Release the pin to the original position.
Memorize and record the new combination for future
reference.
The new code is new set.
TO LOCK
The combination must be scrambled by rotating the 4 dials.
TO FIT
It is important to drill a small pilot hole for the screws as they cannot be unscrewed once used.
Hold the slide bolt in the required position and check the slide bolt and the gate /door will function
correctly. Once positioned correctly, mark the location of the 4 screw holes.
The slide bolt should be mounted using all 4 corner fixing holes on the back plate. Drill a small Pilot hole
for the screws. Screws should be tight without distorting the back plate.
Dimensions
11.5cm (L)
Composition
Steel and Zinc Metal
•
2 IN 1 BOLT
•
EASIER TO USE THAN A REGULAR PADLOCK
•
BUILT IN LOCK
•
WITH STRONG SOLID STEEL BOLT 11.5CM
LONG ZINC ALLOW CASING
•
4 DIGIT COMBINATION LOCK WITH LARGE
DIGITS WHICH YOU CAN CHOOSE YOURSELF
•
PERFECT FOR GARAGES, SHEDS, EXTERNAL
STORAGE ETC
•
SIMPLE INSTALLATION WITH ALL SCREWS
INCLUDED
