Copper King Deep Fill Pie Maker
H701
Instructions for Use
Please read and retain these instructions for future reference
v001: 05/03/21
•
Never pour cold water on the hot plates, as this could damage the device and can cause hot water to
spill out of the appliance.
•
Wipe the inside part and the edges of the appliance with a paper towel or a soft cloth.
•
Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel
wool, which can damage the device.
•
Let the device dry totally or wipe off any moisture with a dry soft cloth before storage.
•
Wrap the cord around the area as seen in the figure below and store it in an upright position on a dry,
flat and safe place.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that are ASTA
or BSI approved to BS1362 and with a rated current of 7-amps should be used. If there is a fuse cover fitted,
this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the plug must not be
used. Spare fuse holders and fuses are available from electrical outlets. If the socket outlets in your home or
office are not suitable for this product’s plug, the plug must be removed and disposed of safely. Attempts to
insert the plug into the wrong socket is likely to cause electric hazard. A replacement plug should be wired
according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of
flexible plastic. This product is earthed; the wires in the cord set are colour coded in the following way:
Flat surface
