3 in 1 Garden Vacuum
9255
Instructions for Use
Please read and retain these instructions for future reference v005: 17/04/19
(10) IT IS RECOMMENDED TO CONNECT THE MACHINE TO THE MAINS SUPPLY OVER A RESIDUAL
CURRENT OPERATED DEVICE WITH A MAXIMUM BREAKING CURRENT OF 30MA.
(11) USE ONLY EXTENSION CABLES THAT ARE APPROVED FOR OUTDOOR USE AND ARE NOT
LIGHTER THAN RUBBER-SHEATHED CABLES OF TYPE H07 RN-F ACCORDING TO DIN/VDE 0282 WITH
A DIAMETER OF AT LEAST OF 1.5 SQ.MM. THE CABLES MUST BE SPLASH-PROOF.
MAINTENANCE AND STORGE
Make sure that all nuts, bolts and screws are firmly tightened to ensure the safe operation of the
device.
Regularly check the collecting bag for signs of wear and tear.
Replace worn or damaged parts.
Only use original parts and accessories.
Store the device in a dry place.
REMOVING OBSTRUCTIONS FORM THE VACUUM OPENING
Twigs and long objects may cause obstructions to develop in the vacuum opening on the bottom side of the
vacuum unit. If this should be the case try to slightly shake the unit during operation. If this should not solve
the problem, switch the unit off and pull the plug. Remove the obstruction using a stick or another long, thin
object (don’t use metal objects).
To avoid objects that cause an obstruction from being repeatedly sucked in, it may be necessary to move the
unit slower over the debris to be cleaned up.
The top and bottom parts
of the tubes can be
disassembled (see Fig. A),
if the collection bag has
become too heavy.
Rotate 2 knobs (see Fig.
B).
Fig A
Fig B
