2
Installation Instructions – SLES/SLESN
Installation Instructions – SLES/SLESN
IB519146EN www.cooperlighting.com
Row Aligner
Figure 1.
Figure 2.
Figure 3.
INSTALLATION
SLES/SLESN Assembly Instructions
1. Flip socket track in place (Figure 1).
2. Install screws on the sides of channel.
3. Mount fixture to structure, junction box or ceiling using
cable, chain, or stem (hardware provided by others).
4. Make supply connections in accordance with national,
state, and local electrical codes.
5. Install channel cover with quarter turns provided.
6. Install LED lamps and energize fixtures in accordance
with TLED lamp type requirements.
Conduit Installation
1. Remove KO and install fitting (Figure 2).
2. Flip socket track in place.
Refer to Step 2 of Assembly Instructions for remaining
installation.
Row Aligner Instructions
1. Bend the row aligner and separate it from socket track
(Figure 3).
2. Insert row aligner into channel.
3. Install screws on the sides of channel.
ote:
N
Endplate must remain in place at end of row.
WARNING - This product must be installed in
accordance with the applicable installation code
by a person familiar with the construction and
operation of the product and hazards involved.
Risk of Fire and Electric Shock- The electrical
rating of these products are 120-277V, the
installer must determine whether they have
120-277V at the luminaire before installation.
Replacement lamps should be Type B Dual
ended by Signify/Philips. See existing lamp for
model number.
WARNINGS, CAUTIONS AND OPERATING INSTRUCTION
Summary of Contents for Metalux SLES
Page 7: ...7...
