WARNING
A seat post that is positioned too high can damage the bike and can cause you to lose control and fall. Make sure the
minimum insertion mark is inside the frame.
3.6 PEDALS
The left pedal is left-hand threaded, while the right pedal is right-hand (normal) threaded.
Tighten pedals into the crank arms to 350-380 lb•in (40.2-42.9 N•m).
Adjustment of pedal bearings requires special tools and training.
These services should only be performed by your dealer.
3.7 CHAIN SET AND BOTTOM BRACKET
•
To check the bottom bracket bearing adjustment
1. Lift the chain from the chain rings.
2. Rotate the crank so that one of the arms is parallel to the seat tube.
3. Put one hand on the crank arm and one hand on the seat tube, and attempt to
move the crank arm laterally toward and away from the seat tube.
4. Spin the cranks.
If the crank feels or sounds loose, or if the motion stops abruptly or you hear
a grinding noise coming from the bearings, the bearings need to be serviced.
Servicing the bottom bracket bearings requires special tools and
training. These services should only be performed by your dealer.
Cooper
Bicycle Owners Manual 35
MANUAL 20.11.12 2/7/13 00:00 Page 40
