manualshive.com logo in svg

Cooper Surgical ALLY II UPS, Instructions For Use Manual

The Cooper Surgical ALLY II UPS is an advanced medical device power solution. Ensure seamless operation and regulatory compliance by referring to the comprehensive "Instructions For Use Manual." Download this manual for free from manualshive.com, offering reliable access to user manuals and documentation for a vast range of products.

Share
Download
background image

14/16

ALLY II UPS™

SECTION 17 DISPOSAL

Dispose of in accordance with all applicable Federal, State, and Local Medical/Hazardous waste practices.

SECTION 18 WARRANTY

CooperSurgical warrants that the ALLY II UPS™ will be free from defects in materials and workmanship for one 

year from the date of purchase. If CooperSurgical, Inc. determines that the ALLY II UPS™ fails to perform within 

that one year, as the sole remedy for that failure to perform, at CooperSurgical’s discretion, we will repair or 

replace the ALLY II UPS™ free of charge.

SECTION 19 SERVICE

Annual service by authorized CooperSurgical personnel is required to ensure proper device operation. Please 

contact CooperSurgical Representative or CooperSurgical service team: [email protected]

Summary of Contents for ALLY II UPS

















Reviews:

No comments

Related manuals for ALLY II UPS

halstrup-walcher PS*3**DN series Instruction Manual preview
PS*3**DN series
Brand: halstrup-walcher Pages: 35

Brands by name

Popular brands

Load more brands