Cooper Sound CS 208, Operator'S Manual

Page: 6 / 36

13. Comm. Trimmer : Adjusts return level.
14. T / D : Tape or direct to phones 1.
See AB / CD below (16).
15. Main / Aux : Selects either main, ABCD or Aux (A1, A2)
to phones 1.
16. AB / CD : When main is selected, group AB or CD
is sub-selected to phones 1. This also controls
the tape return (A = L, B = R, C = L, D = R).
17. Phones 1 selector :
M = Mono to both outputs.
L = A, C or A1 mono to both outputs.
ST = A, C, A1 = L. B, D, A2 = R.
R = B, D, A2 mono to both outputs.
M.S. = M/S decode to phones 1.
18. Level : Phones 1 gain control.
Mic
19. Internal slate microphone (See Ext. Slate) (21).
OSC/SL Assign
20. Assigns oscillator & slate to AB, CD or Aux outputs.
OSC, SL, PL, Roll
21. Ext. Slate : Selects internal or external slate mic.
Down = external slate input on rear panel.
(Bypasses internal slate mic).
22. Slate Trimmer : Controls level of both Int. & Ext. slate
(multi-turn pot).
23. 1k / 10k : Frequency select for internal oscillator.
Up = 1kHz, down = 10k.
24. Trimmer : Oscillator level (multi-turn pot).
25. Osc : Internal oscillator.
(up = on, down = momentary on).
26. SL : Slate mic.
down = with LF tone, up = no LF tone.
27. PL : Master private line & level control.
Directs slate mic to phones 1, 2, 3 only.
Assigned by (1 & 11).
28. Roll 1 & 2 : Up = on, down = pause or stop.
See “pin outs” for further details.
OUTPUT MODULE
MODEL CS 208
4
Right Page
Right Page