MODEL CS 208
32
AN 3 - COMMUNICATIONS IN - MULTIPLE INPUTS
The communications input can be used with multiple inputs (eg: 2 boom operators) by using a special adapter cable
(see below).
The communication in connector on the rear panel is balanced.
Tip = Hi, Ring = Low, Sleeve = ground.
For multiple inputs, the ring should be grounded. This is done either by use of a mono jack plug for the adapter cable, or
using a stereo jack plug & shorting the ring to sleeve.
The resistors shown in the diagram are necessary to provide some isolation between two or more sources.
Right Page
Right Page
Summary of Contents for CS 208
