i-gsm02
Page 7
5. Fit the i-gsm02 to the plug on module sockets (see Figure 5). Take
care not to unseat the antenna lead connector. Do not use excessive
force when seating the module.
Figure 5. Fitting i-gsm02 Module
6. Using the supplied surface wipe, clean the area onto which you
intend to stick the antenna. Remove the backing paper on the
glued side of the antenna. Fix the antenna onto the cleaned
surface. Note: The adhesive on the antenna is fast acting. You
will not be able to reposition the antenna once you have put it
in place.
7. Reconnect the battery. (The control unit will not start.)
Registering a SIM Card
Once you have fitted the i-gsm02 module and its SIM card, you
must register the SIM card with the service provider. To do this you
must make a telephone call from the i-on40 control unit via the
newly installed i-gsm02 module.
7. Apply mains power to the i-on40 unit.
8. From standby, enter the Installer code, then use the scroll keys
(
u
or
n
) to display the Test menu:
Press
Y
to select. The screen will show the first option: Test
Messages.
