i-gsm02
Page 6
Fitting the Module
Note: Do not fit the i-gsm02 OR its antenna until you have
confirmed that there is adequate network signal strength.
1. Remove mains power from the i-on40 end station.
2. Caution: Open the end station lid and disconnect the battery.
3. Pass the plug end of the antenna lead from outside the end
station case through one of the cable entry holes into the
interior and connect the antenna lead plug to the i-gsm02 (see
Figure 3).
Figure 3. Connect the Aerial
4. Fit the SIM card (see Figure 4). Ensure that you fit the SIM card
in the correct orientation.
Figure 4. Fit a SIM Card
