Cooper Security 65EN, Manager Manual, Page: 30 / 52

30
allocated partition) only when in range
of a specific MRNode receiver
1
. OR:
Unused : The control unit will ignore any
telecommand programmed as Unused,
even though it may still be learned by an
MRNode. (Hint: Use this option to
disable telecommands that have been
lost.) Press
[
to save your changes.
Button 1 ^Set
Prtns > 1*******
6. Press
[
to select this option.
(Or, use
|
or
¬
to select other buttons.)
Press
1
to
8
(
1
to
4
for the
65EN/85EN) to select the partitions that
will be set by the button (page 37.)
Press
[
again to save your changes.
Button 4 vUnset
Prtns >1*******
7. Press
[
to select this option.
Press
1
to
8
(
1
to
4
for the
65EN/85EN)to select the partitions that
will be
unset by button 4. Press
[
again to save your changes.
Button PA
Ptns 1*******
8. Press
[
to select this option.
Press
1
to
8
(
1
to
4
for the
65EN/85EN) to select the partitions that
will be sent into alarm by a PA (button 1
and 4). Press
[
again to save your
changes.
Z
722r and 727r telecommands can start
PAs, 723r and 728r cannot start PAs.
Telecmd 1
^elecommand Name
9. Press
[
to select this option.
Use the text editing keys (page 35) to
edit the telecommand name, then press
[
to save your changes.
1 The installer must allocate partitions to individual MRNodes.