Cooper Security 65EN, Manager Manual, Page: 13 / 52

13
Option
4
: Testing the System
Option
4
-
1
:
Performing a Walk
Test
This option enables you to check that zones
are operating correctly. You can test only
those partitions that you have access to.
Each zone tested is added (once) to the
event log, which you can review using User
option 9-1 (page 31).
User Menu
4:Test Options
1. Press
[
to select this option.
Test Options 1
Walk Test
2. Press
[
to select
Walk Test
.
Walk Test
Ptns > 1*......
3. Use the numeric keys to select the
partitions to test, then press
[
. Any
partition numbers shown will be tested.
(A “*” indicates that the partition will not
be tested, and “.” indicates that you have
no access to the partition.
Esc To Stop Test
& View Zones
4. Walk through your partitions and operate
all detection devices.
0003 Active
As you activate each zone, the internal
sounders will emit a chime tone and the
display will identify the activated zone.
5. When you have finished the test, press
]
.
Panel Zone 1
0001 Healthy
6. The status of the lowest zone number
tested is displayed. Press
[
to view the
next lowest zone tested.
7. Press
]
to exit.