Cooper Lighting Solutions
EG-2 9850-000776-01
5
Connecting the Supply
Power is to be supplied to the EG2 via an external
regulated power supply in the range of 9-36VDC
0.3A
Cooper Lighting Solutions are able to provide a
recommended power supply if required.
Catalogue Number: PSU-15-DIN (15VDC 0.67A)
A removable 2 way connector screw terminal
plug is provided for the connection of the power
supply. Terminal sizes: 2 x 1.5mm
2
iCAN Network Connections
A removable 5 way connector screw terminal
plug is provided for the connection of iCAN
network cables. Terminal sizes: 5 x 1.5mm²
Maximum segment distance: 500m (1640 ft)
Devices per segment: 100 (without bridge or
repeater)
Consult Cooper Lighting Solutions for
information on alternative cable types.
IMPORTANT NOTE: Connecting a mains
potential cable to the iCAN Network terminals is
likley to damage the unit and others connected,
and invalidate warranty.
+V
0V
CAN-L
SHIELD
CAN-H
0V
+VDC
iCAN devices are ‘daisy-chained’ on the network.
Spurs from the Network are not permitted
and will result in communications problems.
Devices on an iCAN network can be wired in any
order. Termination is required at both ends of
the network.
Network Termination
T - Indicates where a termination is required.
The EG-2 has built-in network termination. If
the EG-2 is at the end of the network, ensure
the CAN TERMINATION jumper is fitted in the
Termination On position.
Termination On
Termination Off
iCAN
Device
iCAN
Device
EG2
Function
iCANnet Cable Colours
0V
Black
CAN L
Blue
Shield
Silver
CAN H
White
+VDC
Red