Cooper Lighting Solutions
EG-2 9850-000776-01
4
Ethernet LINK
LED on indicates the
link is connected at
100Mb
LED off indicates the
link is connected at
10Mb
Ethernet DATA
LED on indicates that
the Ethernet link is
established
LED flashes off briefly
when Ethernet traffic is
present
SD card DATA
LED flashing indicates
memory card is being
accessed
SD card INPUT
Indicates SD Memory
card location
iCAN DATA
Red flashing LED indicates
traffic being sent and/or
received
Red LED on indicates a
CANbus error
iCAN IDENT
Switch that causes the EG2 to
send a message on the CAN
BUS to identify itself
iCAN status
Green flashing LED indicates
normal operation
Product Overview
The label on the enclosure identifies the position of the status LEDS, switches & connectors.
iCAN Network
For connection
see Page 5 for
wiring details
TIMECLOCK
Set through iCAN
programming
software.
LED on when
timeclock active
RESET
Switch that resets
the device. Only
press this on direct
instruction from
Cooper Lighting
Solutions to avoid
data corruption
Ethernet INPUT
Indicates Ethernet
connector location
POWER
The Green Power
LED will double flash
continuously while
EG2 is on.
CAN Termination
End of network
termination jumper.
