All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not
guaranteed. In accordance with Cooper Crouse-Hinds “Terms and Conditions of Sale,” and since conditions of use are outside our control, the purchaser should determine the suitability of
the product for his intended use and assumes all risk and liability whatsoever in connection therewith.
Cooper Crouse-Hinds, LLC
IF 1664
PO Box 4999, Syracuse, New York 13221 • U.S.A.
Revision 2
Copyright© 2013, Cooper Industries, Inc.
New 05/13
Supercedes 03/13
With Visor Only
With Visor and Guard
VISoR InStALLAtIon InStRUctIonS
1.
Remove power from floodlight.
2.
Place floodlight face up.
3.
Carefully align visor with two (2) screw holes at the top of the fixture shown in the image above.
4.
Install screws provided with visor, taking care to not scratch the finish of the floodlight. Torque to 80
in-lbs (9.0 N-m).
5.
Install floodlight per above instructions.
notE:
Visor can be installed before or after floodlight has been in operation.
With Guard Only
GUARD InStALLAtIon InStRUctIonS
1.
Remove power from floodlight.
2.
Place floodlight face up.
3.
Carefully align guard with four (4) screw holes on each side of the fixture shown in the image
above.
4.
Install screws provided with guard taking care to not scratch the finish of the floodlight. Torque
to 80 in-lbs (9.0 N-m).
5.
Install floodlight per above instructions.
notE:
Guard can be installed before or after floodlight has been in operation.
notE:
Visor and guard can both be used on a floodlight at the same time. Visor and guard are always
installed in the field and are not factory installed.
