Cooper Crouse-Hinds CEAG SEB 8, Operating Instructions Manual

Page: 10 / 16

10 10
10 10
10
CEAG Sicherheitstechnik GmbH
Crouse-Hinds
Switch Main beam Flashg. Pilot light LED display Cause Measure
position on main beam on
Pilot lamp
⊗ ⊗ ⊗ ⊗ ⊗ dimmed pulsing red Defect. Replace pilot
pilot lp. lamp
Pilot lamp
⊗ ⊗
⊗ ⊗ ⊗ none Function ok None
Main lamp
⊗ ⊗
⊗ ⊗ ⊗ Acc. to batt. Defect. Replace
capacity main lamp main lamp
Main lamp
⊗ ⊗ ⊗ ⊗ ⊗ Acc. to batt. Function ok None
capacity
Main lamp
⊗ ⊗
⊗ ⊗ ⊗ only red LED Deep discharge Recharge
or none protection active
function ok
Flashing
⊗ ⊗
⊗ ⊗ ⊗ flashing Acc. to batt. Function ok None
mean beam
capacity
Flashing
⊗ ⊗ ⊗ ⊗ ⊗ flashing Acc. to batt. Defect. Replace
main beam capacity main lamp main lamp
7. Operation and fault analysis
Operation
Charging
OFF Acc. to batt. Charging None
cap. or leading completed
LED pulsing
OFF
⊗ ⊗
⊗ ⊗
⊗ ⊗ ⊗
⊗ ⊗
⊗ ⊗ ⊗
⊗ ⊗
⊗
None Defective Searchlight
electronics to be passed
for repair
Main lamp Acc. to batt. Function ok None
capacity or
pulsing LED
Flashing Acc. to batt. Function ok None
main lamp capacity or
pulsing LED
Pilot lamp
⊗ ⊗
⊗ ⊗
⊗
Acc. to batt. Recharge None or switch
capacity or period extended to OFF pos.
pulsing LED to 28 hours
Subject to alteration or supplement of the product series.