Introduction for buttons on remote controller
10
Clock
button
1
1
Set clock of the system
.
will change quickly if holding " " or " " button). Time setting range is 0.5~24hours.
Press this button again to confirm timer setting and the characters of HOUR ON
(OFF)will stop flashing.
If the characters are flashing but you haven’t press timer button,timer setting
status will be quit after 5s.If timer is confirmer, press this button again to cancel
timer.
● Under ON status, press this button to set timer OFF; Under OF
F status, press
this button to set timer ON.
● Press this button once and the characters of HOUR ON (OFF) will flash to be
displayed. Meanwhile, press " " button or " " button to adjust timer setting (time
▲
▲
▲
▲
1
2/13
Timer
button
Swing button
(OPTION)
1
4
Press this button to set
left
&
right
swing angle.
Fan button
15
This button is used for setting Fan Speed in the sequence that goes from AUTO,
, to
, then back to Auto.
* Note: Fan speed under dry mode is low speed.
▲ / button
▲
16
Press / button to increase/decreaseset temperature. In AUTO mode,
set temperature is not adjustable.
▲
▲
▲
When setting Timer On or Timer Off, press "▲" or " " button to adjust the time.
