Note:
●
Outdoor temperature display is not available for some models. At that time, indoor
unit receives " " signal, while it displays indoor set temperature.
Press this button, you can see indoor set temperature, indoor ambient temperature
on indoor unit’s display. The setting on remote controller is selected circularly as below:
no display
Press this button in COOL or DRY mode to turn on X-fan function.
When this function is started up, indoor fan will still operate at low fan speed for a
while after turning off the unit by remote controller.
6
Temp button
9
X-Fan
button
Introduction for buttons on remote controller
9
7
H
ealth/Air
button
Health function
In unit on status, press
button to set health function.
When
is displayed, health function is on.
When
is not displayed, health function is off.
Health function is available when the unit is equipped with anion generator.
When health function is on, the anion generator will start operation, adsorbing
the dusts and
killing the bacteria in the room.
Air function
(
option
)
Press
button
until
is displayed, then air function is turned on.
Press
button until
is disappeared, then air function is turned off.
Press this button to
turn on the display's light and press this button again to turn
off the display's light.
8
Light button
Sleep button
10
Under Cool, Heat or Dry mode, press this button to turn on Sleep function.
Press this button again to cancel Sleep function. Under Fan and Auto modes, this
function is unavailable.
