Air Source Heat Pump Water Heater
1
1 Precautions for Use
indicates the prohibited operations.
indicates instructions that must be
followed.
indicates instructions to which special attentions must be paid.
Before you use this product, please read the following instructions carefully:
Caution
For any exceptions such
as burning smells, please
cut off the power supply and
then contact
C&H
authorized maintenance
center.
If an exception persists, the
air source water heater may
be damaged, which may
even cause an electric shock
hazard or cause a fire.
Do not operate the water
heater with wet hand.
Otherwise, an electric shock
hazard may be caused.
Before installation,
check whether the
voltage of the local
power grid
accords with the
voltage on nameplate
of the unit, and
capacity of the power
supply, power cord or
socket is suitable for
input power of this unit.
Dedicated lines must be
used for the power supply
to prevent a fire.
Do not use multipurpose
sockets or mobile wiring
boards to connect wires.
Otherwise, overheating or
even a fire may be caused.
Pull out the power plug
and drain the main unit
and water tank when water
heater is not in use for a long
time to prevent cracking
caused by cold weather.
Do not
damage wires or use
undesignated wires.
Otherwise,
overheating or a fire
may be caused.
Before cleaning, please
cut off the power supply.
Otherwise, an electric
shock hazard may be
caused.
Use dedicated circuits with
a leakage circuit breaker
protection for the power
supply and ensure sufficient
capacity.
Otherwise, overheating, a
fire, or an electric shock
hazard may be caused.
Do not change the
power cord or
socket without any
consent. Wiring tasks
must be completed by
qualified electricians.
Ensure proper
grounding for the
metal part of the unit,
and do not change
the grounding mode.
