11
Installation
Current leakage protector
Please must connect one current leakage protector between power supply and circuit breaker.
Power off
Please power off the heat pump when there is thunder/radio/power grid fluctuating
Affecting our heat pump running. After that, power on and restart our heat pump by pressing
On/off button.
The running condition for the heat pump is from -15
℃
~43
℃
.
Please do not use lake water, river water or untreated ground water for our heat pump.
Running condition
Defrosting
When there is frost formed on the unit, heat pump will enter defrosting mode(2-10min)
to make heat pump running at good condition.
Fan motor will be stopped during defrosting mode.
Running protection
During high temp. ambient condition, Fan motor might stop running
Shutdown Protection
After heat pump being shut down,
compressor will stop for 3 minutes at least before it starting up once again.
Function introduction
