![background image](http://html1.mh-extra.com/html/coolworks/mwdck-06crn1-bk2/mwdck-06crn1-bk2_instruction-manual_2661388012.webp)
While keeping a firm grip on the air conditioner,
a
c refully place the unit into the window opening so
the bottom of the air conditioner frame is against
the window sill (Fig.4). Carefully close the window
behind the top rail of the unit.
2
Fig.4
Extend the side panels out against the window
frame (Fig.5).
3
Place the frame lock between the frame
extensions and the window sill as shown(Fig.6).
Drive 3 / 4 (19mm)or 1 / 2 "(12.7mm) locking screws
through the frame lock and into the sill .
NOTE
: To prevent window sill from splitting,drill
1 / 8" (3mm) pilot holes before driving screws.
4
"
window
frame
Fig.5
Fig.6
Fig.7
Drive 3/4" (19mm) or 1/2" (12.7mm) locking
screws through frame holes into window sash (Fig.7).
5
Installation Instructions
11
Wooden Windows
INSIDE
OUTSIDE
H:About 3/4 to 1
for 5K to 8K);
Measure from the cabinet edge
3
H:About 1 to 1 /
for 10K to12K);
8
H
NOTE:
Check that air conditioner is tilted back about H
(Fig.5) (tilted about 3°to 4° downward to the outside).
After proper installation, condensate should not drain
from the overflow drain hole during normal use, correct
the slope otherwise.
Summary of Contents for MWDCK-06CRN1-BK2
