![background image](http://html1.mh-extra.com/html/coolworks/mppdb-09hrn1-bcg5/mppdb-09hrn1-bcg5_instruction-manual_2661386008.webp)
Installation
Step Three: Preparing the
Adjustable Window Slider
1. Depending on the size of your window,
adjust the size of the window slider.
2. If the length of the window requires two
window sliders, use the bolt to fasten the
window sliders once they are adjusted to
the proper length.
Note: Once the Exhaust Hose assembly and Adjustable Window Sliderare prepared,
choose from one of the following two installation methods.
Cut the adhesive foam seal
A and B strips to the proper
lengths, and attach them to
the window sash and frame
as shown.
Insert the window slider
assembly into the window
opening.
Insert the window slider
adaptor into the hole of
the window slider.
Cut the non-adhesive foam
seal C strip to match the width
of the window. Insert the seal
between the glass and the
window frame to prevent
airand insects from getting into
the room.
Type 1: Hung Window Installation
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Window slider A Window slider B
(if required)
Foam seal C
(Non-adhesive type)
If desired, install the
securitybracket with
2 screws as shown.
2 Screws
Security Bracket
Window slider A
Window slider B
Bolt
Bolt
Window slider C
Summary of Contents for MPPDB-09HRN1-BCG5
