![background image](http://html1.mh-extra.com/html/coolworks/mppdb-09hrn1-bcg5/mppdb-09hrn1-bcg5_instruction-manual_2661386010.webp)
Operation
Swing button(optional)
(Applicable to the models with
auto swing feature only)
Used to initiate the Auto swing
feature. When the operation is
ON, press the SWING button
can stop the louver at the
desired angle.
Timer button
Used to initiate the AUTO ON
start time and AUTO OFF stop
time program, in conjuction with
the + & - buttons. The timer on/off
indicator light illuminates under
the timer on/off settings.
Mode button
Selects the appropriate operating
mode. Each time you press the
button, a mode is selected in a
sequence that goes from AUTO,
COOL, DRY, FAN and HEAT
(cooling only models without).The
mode indicator light illuminates
under the different mode settings.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing)
temperature settings in 1°C/1°F
increments in a range of 17°C/62°F to
30°C/86°F or the TIMER setting in a
range of 0~24hrs.
NOTE: The control is capable
of displaying temperature in
degrees Fahrenheit or degrees
Celsius. To convert from one
to the other, press and hold
the Up and Down buttons at
the same time for 3 seconds.
Fan/Ion button(Ion is optional)
Control the fan speed. Press to select the
fan speed in four steps-LOW, MID, HIGH
and AUTO. The fan speed indicator light
illuminates under different fan settings.
NOTE: Press this button for 3 seconds to
initiate ION feature. The ion generator is
energized and will help to remove pollen
and impurities from the air, and trap them
in the filter. Press it for 3 seconds again to
stop the ION feature.
Sleep/Eco button
Used to initiate the SLEEP/ECO
operation.
Power button
Power switch on/off.
Summary of Contents for MPPDB-09HRN1-BCG5
