Coolmay CM-4TM User Manual Download Page 6

Page: 6 / 61

Safety Instructions

Following these safety precautions ensures safe and correct use of the product and

helps prevent accidents and reduce risk.

Safety instructions are divided into two categories: warning and caution:

Warning sign, failure to follow this warning may
result in accident or death
Caution signs, failure to follow this warning may
result in malfunction or product damage

◆

When using large instruments (such as nuclear power, medical machinery,

surveying, railway, aviation, combustion equipment, entertainment machinery, etc.,

including safety facilities) that have an impact on life or property, please make sure to

perform double safety measures before using. Otherwise, fire, life-threatening, property

damage may occur.

◆

Installed on the panel, otherwise it may cause electric shock.

◆

Make sure to disconnect the power supply while checking or repairing, otherwise it

may cause electric shock.

◆

Please check the polarity of the power supply before powering up, otherwise it may

cause fire.

◆

Please do not disassemble or modify the product. If you need internal inspection or

repair, please contact our company. Otherwise, it may cause fire, electric shock and

product damage.

◆

Do not use this product outdoors, otherwise may result in short product life or

electric shock.

◆

Use AWG 20 (0.5mm2) or better cable when connecting, otherwise it may cause

fire.

◆

Use this product within the rated specifications, otherwise it may damage the

Summary of Contents for CM-4TM






























































Search results

Summary of Contents for CM-4TM

Reviews:

Related manuals for CM-4TM

Brands by name

Popular brands

Coolmay CM-4TM, User Manual

Search results

Summary of Contents for CM-4TM

Reviews:

Related manuals for CM-4TM

Brands by name

Popular brands