Coolmay CM-4TM User Manual Download Page 5

Page: 5 / 61

Thank you for purchasing Coolmay products.

This user manual includes the instructions and methods of the product. Please

read it before using.

Introduction to use the manual

◆

Please read carefully before using the product

◆

The purpose of this manual is to introduce the functions of this product in detail, and

is not responsible for other purposes..

◆

This manual can not be edited or copied without authorization.

◆

This manual is not included with the product. Please download it from our website

www.coolmay.com

◆

The contents of this manual may differ due to product changes or other reasons

without prior notice.

◆

Please leave us messages if you have any suggestions for this manual.

Descriptions of symbols in the communication manual

Symbol

Description

Special function supplement.

Warning sign, failure to follow this warning may
result in accident or death
Attention signs, failure to follow this warning
may result in malfunction or product damage

Related function use examples

※

comment mark

Summary of Contents for CM-4TM






























































Search results

Summary of Contents for CM-4TM

Reviews:

Related manuals for CM-4TM

Brands by name

Popular brands

Coolmay CM-4TM, User Manual

Search results

Summary of Contents for CM-4TM

Reviews:

Related manuals for CM-4TM

Brands by name

Popular brands