www.CoolGear.com
To change the virtual COM port properties:
•
Select the "USB Serial Port"
•
Click “Properties”.
•
Select "Port Setting" and “Advanced”.
•
Click the drop down arrow on COM Port Number, and scroll to the required COM port. Select "OK".
•
Return to the Device Manager Screen. You will see that the USB Serial Port installation has been changed to the
new COM Port Number.
Uninstalling Windows 2003 / XP / 2000 Drivers
Please proceed with the following steps to uninstall the 2003/XP/2000 driver:
1.
Insert the “USB COM Series Driver and Utility” CD into your CD-ROM.
2.
The “USB COM Series Driver and Utility CD” dialog box appears.
3.
Under “Driver Uninstalling”, double click “Windows 2003, XP, 2000 driver uninstall” to uninstall the device
driver.
4.
When following dialog box appears, double click “Clean System” to uninstall the 2003/XP/2000 drivers.
5.
You need to disconnect all USB to serial Adapters from your PC, when the message below appears. Double click
“OK” to start uninstalling Windows 2003/XP/2000 USB to Serial drivers.
6.
Double click
“Yes”
to confirm it.
