14
USB device shared for client computer
After the USB device connect to AnyplaceUSB-S4 and the remote client computer
connect to this USB device over network successfully; the “Device x Information” will
show following message:
When the shared USB device of AnyplaceUSB-S4 connect to remote client computer
successfully, the “Device x Information” will show “Connect to xxx.xxx.xxx.xxx” and a
“Disconnect” control button on the bottom left under “Device x Information”
message , the “xxx.xxx.xxx.xxx” is IP address of remote client computer.
USB devices settings
Form “Device x Information”, you can set some options for USB devices manually,
under “Network option”, you can enable traffic encryption by ticking the encryption
box. It is recommended for security reasons. All data sent will be encrypted, although
it may slightly slow down the communication speed.
The traffic compression option helps speed up interaction with certain types of USB
devices and reduces Internet traffic. You can enable traffic compression option by
ticking the compression box. You may find this useful for USB devices which transfer
data in uncompressed formats, like scanners. It is recommended to not
use this option
for USB devices which transfer incompressible types of data, such as isochronous USB
devices (e.g. audio cards, web cams, etc.).
For example, web cam video compression is enabled by default, and further
compression may degrade video quality.
