5
(2) Clutch Plug
(1) Clutch Unit
(4) Chain
(3) Bracket Covers
(5) Bottom
Rail Cap
(6) Tie Downs
(7) Bottom Rail
(8) Shade
(9) Idle
End Unit
(10) Idle End Plug
(11) Aluminum Tube
(B) Clutch Plug
(A) Clutch Unit
(D) Chain
(C) Bracket Covers
(E) Bottom
Rail Cap
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(D) Wand
(C) Bracket Covers
(E) Bottom
Rail Cap
with ring
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(C) Wand
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(F) Shade
(G) Idle
End Unit
(H) Idle End Plug
(I) Aluminum Tube
(2) Clutch Plug
(1) Crank Unit
(3) Wand
(4) Bottom
Rail Cap
with ring
(6) Bottom Rail
(H) Shade
(8) Idle
End Unit
(9) Idle End Plug
(10) Aluminum Tube
(E) Bottom
Rail Cap
with ring
(G) Bottom Rail
(B) Crank Handle
(A) Full Valance
(C) Receiver
(D) Bungee
(F) Quick Mount
Brackets
You may also need
(6) Quick Mount
Brackets
You may also need
Idle end plug
Aluminium tube
Clutch plug
Clutch unit
Wire
guide
Wand
Bottom exposed
aluminium rail
Blind
Idle end
unit
Wire
guide
Pelmet
cap
Pelmet
cap
Pelmet
You will need:
STEP 1
You may also need
(B) Clutch Plug
(A) Crank Unit
(C) Crank Handle
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(G) Idle
End Plug
(H) Idle End Unit
(I) Aluminum Tube
(K) Traditional Valance
(F) Shade
(J) Valance Bracket
(L) Contemporary Valance Option
(G) Shade
(D) Bottom
Rail Cap
with ring
(F) Bottom Rail
(A) Full Valance (Motorized)
(E) Quick Mount
Brackets
(B) Battery
(C) Solar Panel
(2) Clutch Plug
(1) Clutch Unit
(4) Chain
(3) Bracket Covers
(5) Bottom
Rail Cap
(6) Tie Downs
(7) Bottom Rail
(8) Shade
(9) Idle
End Unit
(10) Idle End Plug
(11) Aluminum Tube
(B) Clutch Plug
(A) Clutch Unit
(D) Chain
(C) Bracket Covers
(E) Bottom
Rail Cap
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(D) Wand
(C) Bracket Covers
(E) Bottom
Rail Cap
with ring
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(C) Wand
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(F) Shade
(G) Idle
End Unit
(H) Idle End Plug
(I) Aluminum Tube
(2) Clutch Plug
(1) Crank Unit
(3) Wand
(4) Bottom
Rail Cap
with ring
(6) Bottom Rail
(H) Shade
(8) Idle
End Unit
(9) Idle End Plug
(10) Aluminum Tube
(E) Bottom
Rail Cap
with ring
(G) Bottom Rail
(B) Crank Handle
(A) Full Valance
(C) Receiver
(D) Bungee
(F) Quick Mount
Brackets
You may also need
(6) Quick Mount
Brackets
You may also need
Idle end plug
Aluminium tube
Clutch plug
Clutch unit
Wire
guide
Wand
Bottom exposed
aluminium rail
Blind
Idle end
unit
Wire
guide
Pelmet
cap
Pelmet
cap
Pelmet
You will need:
STEP 1
You may also need
(B) Clutch Plug
(A) Crank Unit
(C) Crank Handle
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(G) Idle
End Plug
(H) Idle End Unit
(I) Aluminum Tube
(K) Traditional Valance
(F) Shade
(J) Valance Bracket
(L) Contemporary Valance Option
(G) Shade
(D) Bottom
Rail Cap
with ring
(F) Bottom Rail
(A) Full Valance (Motorized)
(E) Quick Mount
Brackets
(B) Battery
(C) Solar Panel
1. DETERMINE DESIRED MOUNTING METHOD
a. This two in one valance design allows you to easily mount the
sun shade to either a ceiling (fig. 1) or a wall (fig. 2).
2. MARK THE HOLES
a. Measure 2 inches in from each end of the sun shade and mark
for bracket installations.
b. Mark a third location near the center of the sun shade for the
third bracket installation.
c. All marks must be made to ensure a level installation of the sun
shade for proper functionality.
3. INSTALL THE BRACKETS
a. In the marked locations, attach Quick Mount Brackets (fig. 4,
fig. 5) with screws, into wooded stud.
b. The release tabs on the Quick Mount Brackets must be facing
out towards you on the ceiling mount or downwards for a wall
mount. This ensures access to the tabs once the sun shade is
installed.
4. INSTALL THE SHADE
a. Snap the shade onto the Quick Mount Brackets, placing the top
of the channel onto the bracket and pushing on the full valance
until you hear them snap into place.
b. To remove the sun shade, hold in the release tab on the Quick
Mount Bracket. (fig. 6).
Wood screws have been provided. If installing into any material
other than wood, additional screws may be needed. If unsure,
check with a local contractor. (see below)
Self tapping screws > Aluminum
Masonry/Concrete screws > Concrete
Drywall anchors > Drywall
Stainless steel > Outdoors
(2) Clutch Plug
(1) Clutch Unit
(4) Chain
(3) Bracket Covers
(5) Bottom
Rail Cap
(6) Tie Downs
(7) Bottom Rail
(8) Shade
(9) Idle
End Unit
(10) Idle End Plug
(11) Aluminum Tube
(B) Clutch Plug
(A) Clutch Unit
(D) Chain
(C) Bracket Covers
(E) Bottom
Rail Cap
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(D) Wand
(C) Bracket Covers
(E) Bottom
Rail Cap
with ring
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(C) Wand
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(F) Shade
(G) Idle
End Unit
(H) Idle End Plug
(I) Aluminum Tube
(2) Clutch Plug
(1) Crank Unit
(3) Wand
(4) Bottom
Rail Cap
with ring
(6) Bottom Rail
(H) Shade
(8) Idle
End Unit
(9) Idle End Plug
(10) Aluminum Tube
(E) Bottom
Rail Cap
with ring
(G) Bottom Rail
(B) Crank Handle
(A) Full Valance
(C) Receiver
(D) Bungee
(F) Quick Mount
Brackets
You may also need
(6) Quick Mount
Brackets
You may also need
Idle end plug
Aluminium tube
Clutch plug
Clutch unit
Wire
guide
Wand
Bottom exposed
aluminium rail
Blind
Idle end
unit
Wire
guide
Pelmet
cap
Pelmet
cap
Pelmet
You will need:
STEP 1
You may also need
(B) Clutch Plug
(A) Crank Unit
(C) Crank Handle
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(G) Idle
End Plug
(H) Idle End Unit
(I) Aluminum Tube
(K) Traditional Valance
(F) Shade
(J) Valance Bracket
(L) Contemporary Valance Option
(G) Shade
(D) Bottom
Rail Cap
with ring
(F) Bottom Rail
(A) Full Valance (Motorized)
(E) Quick Mount
Brackets
(B) Battery
(C) Solar Panel
(2) Clutch Plug
(1) Clutch Unit
(4) Chain
(3) Bracket Covers
(5) Bottom
Rail Cap
(6) Tie Downs
(7) Bottom Rail
(8) Shade
(9) Idle
End Unit
(10) Idle End Plug
(11) Aluminum Tube
(B) Clutch Plug
(A) Clutch Unit
(D) Chain
(C) Bracket Covers
(E) Bottom
Rail Cap
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(D) Wand
(C) Bracket Covers
(E) Bottom
Rail Cap
with ring
(F) Bottom Rail
(G) Shade
(H) Idle
End Unit
(I) Idle End Plug
(J) Aluminum Tube
(B) Clutch Plug
(A) Crank Unit
(C) Wand
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(F) Shade
(G) Idle
End Unit
(H) Idle End Plug
(I) Aluminum Tube
(2) Clutch Plug
(1) Crank Unit
(3) Wand
(4) Bottom
Rail Cap
with ring
(6) Bottom Rail
(H) Shade
(8) Idle
End Unit
(9) Idle End Plug
(10) Aluminum Tube
(E) Bottom
Rail Cap
with ring
(G) Bottom Rail
(B) Crank Handle
(A) Full Valance
(C) Receiver
(D) Bungee
(F) Quick Mount
Brackets
You may also need
(6) Quick Mount
Brackets
You may also need
Idle end plug
Aluminium tube
Clutch plug
Clutch unit
Wire
guide
Wand
Bottom exposed
aluminium rail
Blind
Idle end
unit
Wire
guide
Pelmet
cap
Pelmet
cap
Pelmet
You will need:
STEP 1
You may also need
(B) Clutch Plug
(A) Crank Unit
(C) Crank Handle
(D) Bottom
Rail Cap
with ring
(E) Bottom Rail
(G) Idle
End Plug
(H) Idle End Unit
(I) Aluminum Tube
(K) Traditional Valance
(F) Shade
(J) Valance Bracket
(L) Contemporary Valance Option
(G) Shade
(D) Bottom
Rail Cap
with ring
(F) Bottom Rail
(A) Full Valance (Motorized)
(E) Quick Mount
Brackets
(B) Battery
(C) Solar Panel
Fig. 1
Fig. 2
Fig. 3
Fig. 6
this side goes on
mounting surface
Fig. 4
Fig. 5
Ceiling
Wall
Inside
Outside
release tab
