manualshive.com logo in svg

Coolaroo AutoSun Custom Made, Instruction Manual

Share
Download
Coolaroo AutoSun Custom Made Instruction Manual Download Page 22

 

WARNING

Use of solvents or abrasive cleaners may damage the fabric and will void your warranty. Do not use bleach or chlorine. 
It is strongly recommended that in strong wind conditions, your Exterior Window Blind is completely retracted to prevent 
damage to windows and your Window Blind.

 

145 Woodlands Drive,
Braeside, Victoria, 3195 Australia

Coolaroo is a registered trademark  

The best under the sun.

Coolaroo is the leader in exterior fabric technology. 

Our extensive range of attractive, fashionable shade 

and landscape solutions are carefully manufactured 

to beautify your home and provide protection for your 

family and garden from the harsh sun.

coolaroousa.com

THANK YOU FOR PURCHASING A CUSTOM 

MADE COOLAROO PRODUCT.

To register your product, go to 

coolarousa.com

. The products code can be 

found printed above the barcode on the product packaging, alternatively 

you can find it on the relevent 

coolarousa.com

 product page.

Attention:

 The schematics in this manual are for assemble and operation 

illustration only. They may differ from the blind’s actual appearance.

For help with product assembly 
or for any other questions 
you may have, contact out 
Customer Service Department.

U.S. Toll Free: 1 800 560 4667
U.S. Ph: 1 407 772 7979

www.coolaroousa.com

0.00.000.000

Summary of Contents for AutoSun Custom Made























Reviews:

No comments

Brands by name

Popular brands

Load more brands