WARNING
—– Moving Parts —–
Disconnect power
before servicing the
fan
WARNING
—– High Voltage —–
Disconnect power
before servicing the
fan
WARNING
Precision Bearings
Do Not
Pressure Wash at
blade assembly center
DO NOT
INSTALL FAN WITH MOVING PARTS WITHIN 8
FEET OF FLOOR OR GRADE LEVEL WITHOUT A GUARD
THAT COMPLIES WITH OSHA REGULATIONS.
DO NOT
USE UNLESS ELECTRICAL WIRING COMPLIES WITH
ALL APPLICABLE CODES.
DO NOT
WIRE WITHOUT
PROVIDING FOR A POWER SOURCE DISCONNECT AT
THE FAN ITSELF.
DO NOT
SERVICE EXCEPT BY A
QUALIFIED MAINTENANCE TECHNICIAN AND ONLY
AFTER DISCONNECTING THE POWER SOURCE.
FAILURE TO OBSERVE THESE PRECAUTIONS CAN
RESULT IN SERIOUS INJURY OR DEATH.
WARNING
CAUTION
FARM PRODUCTS DIVISION
MEMBER OF AMCA
AMERICAN COOLAIR CORPORATION
P.O. BOX 2300
JACKSONVILLE, FLORIDA 32203
PHONE (904) 389-3646 FAX (904) 387-3449
E-MAIL - [email protected]
Form 912-28-2 (October, 2020)
