EN-4
1.
The Still Photo function is disabled during video recording.
2.
If the card is full, the camera will vibrate for five seconds and the Green LED will flash continuously.
5. Connecting Your Camera
5.1 Connecting Your Camera to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files for
storage.
1. Press button to turn the camera on.
2.
Connect your camera to a PC via the USB cable included.
When the camera is connected to the computer as mass storage device, you can:
1.
Open the MicroSD folder to browse the files saved in the camera
2.
Format the MicroSD card.
5.2 Running the Software
1.
Insert a MicroSD card (Class 6 or higher) with at least 10MB free space into your camera.
2. Press button to turn the camera on.
3.
Connect your camera to a PC via the USB cable included.
4.
Open the MicroSD card folder inside file manager and you will find the file “Cool- iCam.exe” and
“Cool- iCam.app). Click the correct file base on the operating system you are using
Through the software, you can change the camera’s general settings:
1. Frequency
2.
Auto power off,
3.
Set date and time.
4. Software
language
Notes
:
If you cannot find the setting files at your MicroSD folder, disconnect the camera from the
computer and power off. Power the camera back on and reconnect to your computer.
6. Mounting Your Camera on the Handlebar or Pole
1.
Loosen both bike mount screws.
2.
Attach the bike mount to the handlebar or pole and tighten the screws until the mount is firmly
secured
(
Fits around any tubes and around bars from 16mm~ 33mm in diameter.
3.
Tighten the ball joint nut of the bike mount, and then rotate the fixed plate clockwise until it is
tightened at the very bottom of the screw.
4.
Fit the screw of the Bike mount to the tripod socket of the camera.
5.
Screw the camera until it is tight on the bike mount.
Note:
The Ball joint nut allows you to change the angle of the camera. Simply loosen the nut, adjust the camera
angle and retighten the nut.
Also compatible with any iON accessories, which can be found at www.ioncamera.com.
7. Troubleshooting
Problems Causes Solutions
1. LED flashes and camera turns off Battery is depleted
Recharge the camera
Summary of Contents for S3000
Page 1: ...S3000 User Manual ...