26
"Edit" key
Pop-up to enter date and time appears.
The desired end time can be set.
Confirm entries with "OK".
The HACCP input screen pops up.
Cycle interface thaw
Center, large digits: set end time
Small digits: date of end of cycle
The red bar below the date shows the time range
of where the process is at.
The elapsed time is displayed below the bar.
Left side:
Display of the air temperature. A core temperature probe cannot be used during thawing.
Right side:
The individual cycle steps are displayed.
The small blue or red arrow indicates
the unit’s current cycle step.
The red product key takes you to the set cycle
steps.
The dark blue line below the freeze/thaw symbol
indicates which step of the cycle the controller is
in.
You can use the corresponding key to select
which step of the cycle you want to view and / or
change.
In each step of this cycle, you can change or
individually adapt the following for the current
cycle by pressing the corresponding field:
-
time
-
fan speed
-
air temperature
