Cookworks HB951H6, Care & Instruction Manual

Page: 5 / 12

Issue 2 28/09/2021 5
TO USE – BASIC OPERATION (CONTINUED)
4. Follow the use instructions for the specific accessory (see the
following sections).
5. Move the indentation on the speed selector fully to the MIN
position, and switch on by holding down the blender ON/OFF
button. See the following sections for maximum use times
for each accessory.
6. The speed of the blender can be increased by moving the
speed selector towards the MAX setting.
7. To switch off, release the ON/OFF button and allow the blade
/ whisk to come to a complete stop before checking the
consistency of the mix / chop. If satisfactory, remove the
accessory from the mix.
8. To stop or interrupt the blending process, release the
ON/OFF button or turn off at the mains.
USING THE HAND BLENDER
1.
Carefully remove the plastic blade guard and
fit the hand blender to the motor housing and
lock into position (fig.2).
2. Place the ingredients to be blended into the
beaker or another suitable wide container
with high sides. Do not overfill the beaker
(max 1100ml). The use of the beaker is not
recommended to blend thin liquids.
3. Place the container on a stable surface.
4. Place the head of the hand blender below the
surface of the ingredients. Do not immerse
the stem beyond the max level shown in the
diagram opposite.
5. Connect to the mains, select the operation
speed of choice and when using the hand
blender, mix for a maximum of 30 seconds.
If further blending is required, wait 2 minute
before restarting the blender.
Max
insertion
level
Fig. 2