Issue 4 05/08/2021
8
TO USE
–
MAKING ESPRESSO
A hotter more flavoursome coffee will be achieved if the
espresso maker is pre-heated before making the first cup of
coffee.
1.
To preheat the espresso maker, follow the ‘Preparation for
use’ directions on the previous page. Discarding the
equivalent of two espresso cups (200ml approx.) of water.
2.
When step 15 has been completed, remove the filter holder
and fill the filter with fresh ground coffee and pack it lightly
using the flat end of the spoon. One spoonful of coffee is
usually sufficient for most people.
3.
Remove any excess coffee from the rim of the filter holder
before refitting the filter holder to the espresso make as
before.
4.
Place your coffee cup onto the cup shelf directly underneath
the nozzles of the filter holder.
5.
Press the coffee button (
) and after a short while the
coffee will flow. During the brewing process it is normal for
the green coffee indicator to go on / and off as the heater
activates.
6.
When the desired quantity of coffee is obtained or the colour
of the coffee starts to lighten, press the coffee button (
)
to stop the flow.
7.
Remove the filter holder from the espresso maker. Lift the
lever on the filter holder handle and with your thumb hold
the lever firmly against the side of the filter holder. Pour /
tap out the coffee, the lever should prevent the filter falling
into the bin when inverted.
8.
When the last cup of coffee has been made, switch off the
espresso maker off by pressing the ON/OFF ( ) button
Summary of Contents for CM5013B-GS
Page 15: ...Issue 4 05 08 2021 15...
