Issue 4 05/08/2021
11
CLEANING (CONTINUED)
3.
The water tank can be rinsed with clean water and the outside
wiped with a soft damp cloth.
4.
Wipe external surfaces of the espresso maker with a soft
damp cloth and dry surfaces with a soft dry cloth. Do not
use detergent or abrasives as these may scratch the surface.
Never immerse in water.
DESCALING
Descale with a proprietary descaler suitable for espresso
machines and dilute in accordance with the instructions on the
pack.
1.
Fill the water tank to the MAX level with the descaler solution.
2.
Plug in, and check that the steam control knob and all
buttons are in their off position and fit an empty filter and
filter holder.
3.
Switch on using the ON/OFF ( ) button and wait for the
green temperature indicator to illuminate.
4.
Place a jug under the brewing nozzles and then press the
coffee button (
). Allow approximately 2 espresso cups
(200ml approx.) of the liquid to flow from the brewing
nozzles.
5.
Press the coffee button (
) to turn off this function and now
place the jug under the steam nozzle with the tip below the
surface of the liquid.
6.
After a few seconds, press the steam ( ) button, and when
the orange indicator has illuminated allow steam to flow for
about a minute.
7.
Press the steam ( ) button, to turn off this function
8.
Switch off the espresso maker using the ON/OFF ( ) button
and allow the descaler solution to stay in the espresso maker
for 15 minutes.
9.
Restart the espresso maker and repeat steps 3
–
7 a further
four times.
Summary of Contents for CM5013B-GS
Page 15: ...Issue 4 05 08 2021 15...
