10
formation which will collect in the exhaust venting system. The exhaust venting system
should be inspected at least once every year to determine if cleaning is necessary.
Clean Ashes from fire pot and combustion chamber weekly or if it appears as if there is a
buildup of ash.
Disposal of Ashes – Ashes should be placed in a metal container with a tight fitting lid.
The closed container of ashes should be placed on a noncombustible floor or on the
ground, well away from all combustible materials, pending final disposal. If the ashes are
disposed of by burial in soil or otherwise locally dispersed, they should be retained in the
closed container until all cinders have thoroughly cooled.
Clean the racks and inside of cooking chamber with a degreaser. (Recommended cleaner
is Zep FS10184 Degreaser)
NOTE: PROTECT ALL ELECTRICAL
COMPONENTS FROM MOISTURE DURING THIS PROCESS.
If the oven is stored outdoors care should be taken to insure that water does not get into
the pellet hopper. Wood pellets expand greatly when wet and will jam the auger system.
A vinyl cover for the hopper is highly recommended.
Clean the pellet slide periodically to prevent pellet dust buildup – Figure 5.
Figure 5 – Pellet Slide Cleaning
ELECTRICAL SPECIFICATIONS
110 volts, 60 HZ, single phase, 8 amp service required.
The fire pot igniter element is 200 watts.
Auger motor, burner induction fan and convection fan are 4 amps.
