background image

3

Important safety information 

General Information 

o

IMPORTANT:  The adjacent furniture and all materials used
in the installation must be able to withstand a minimum
temperature of 85°C above the ambient temperature of the
room it is located in, whilst in use.

o

Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.

o

Any damage caused by the appliance being installed in
contravention of this temperature limit, will be the liability
of the owner.

o

You should not use this appliance to store items on or as a
work surface.

o

Repairs may only be carried out by service engineers or
their authorised service agent.

Child Safety 

o

strongly recommend that babies and young children are
prevented from being near to the appliance and not allowed
to touch the appliance at any time. During and after use, all
surfaces will be hot.

During use 

o

Any film or stickers that are present on the hob surface when
it is delivered should be removed before use.

o

Care should be used when utilising the appliance, otherwise
there is a risk of burns being caused.

o

You should not allow the electrical connection cables to come
into contact with the hob surface when it is hot or any hot
cookware.

o

If fat or oil overheats, then it can ignite extremely quickly.
For this reason, when cooking with fat and oil the appliance
should not be left unattended.

Summary of Contents for GGH301BK
























Reviews: