CookMax 721012, Manual

Page: 13 / 32

page 12
UK
INSTALLER SECTION
1. INSTALLATION
1.1 Unpacking and preparing the appliance for use
• Unpack the appliance and remove the packing material.
• Place the appliance on a surface which is not slippery.
1.2 Connection to the mains
The connection to the electric supply have to be made by a
magnetothermic omnipolar switch, with distance of 3 mm between
the contacts, or by fuses, or by a differential properly sized according
to the electric norms in force.
This switch have to be dedicated only to this use and installed close to
the appliance.
Please make sure that there is a proper ground connection.
N.B. The connection cable must have the following characteristics. it
must be at least of the H05 RN F type and have a section suitable for
the appliance power.
N.B.: The appliance is equipped with a 220-240 Vac 50 Hz
connection.
2. TECHNICAL DATA
SPECIFICATIONS SINGLE DOUBLE
Dimensions mm (l,p,h) 170x190x490 300x190x490
Power supply 220-240 Vac 220-240 Vac
Frequency 50 Hz 50 Hz
Absorbed power
(Watt)
150 150+150
170
190
490
300
190
490