Timer inquiry
There are three options to use this function:
1. During cooking
- Press the Time “ ” button to see the current time.
- Press the Remind “ ” button to see the remaining cooking time, if an alarm has been set.
2. In Standby and if an alarm has been set, press the Time button “ ” to see the current time.
3. In Standby and if a programmed start time has been set, press the Time button “ ” to see the start time.
Child lock
To lock the control panel, press the Start / Confirm “ ” and the Pause / Cancel “ ” buttons
simultaneously for three seconds.
The oven will beep and the Padlock “ ” will be displayed.
Repeat this step again to unlock the oven.
Display energy saving
In Standby or Alarm mode, press the Start / Confirm button “ ” for three seconds to turn off the display.
Rotate either knob or press any button to turn the display back on.
The display will automatically switch off after ten minutes of inactivity during Standby mode.
Programming the start time
You can program a start time so that the oven will start to cook automatically based on your settings.
1. The clock must be set before using this function.
2. Press the Time button “ ” and the hours digit will flash.
3. Rotate the right control knob “< >” to set the hours from 0-23.
4. Press the Time button “ ” again and the minutes digit will now flash.
5. Rotate the right control knob “< >” to set the minutes from 0-59.
6. Rotate the left control knob “ ” to choose the Cooking Mode.
7. Press the Start / Confirm button “ ” to adjust the cooking time with the left control knob “ ” and the
temperature with the right control knob “< >”.
8. Press the Start / Confirm button “ ” again to confirm the program settings and the Clock will be
displayed along with the Timer “ ”.
9. To cancel the programming, press the Pause / Cancel button “ ” twice.
Notes:
The programmed start time can be checked by pressing the Time button “ ” and the display will
revert to the clock after three seconds.
Once the start time is reached, the oven will switch on, sound a beep and commence cooking.
The Lamp and Defrost modes cannot be programmed.
The Alarm cannot be set when using this function.
Use
24
209255_s1_s1-5059340127484-IM-Easy-V07.indd 24
209255_s1_s1-5059340127484-IM-Easy-V07.indd 24
17-11-2020 09:55:39
17-11-2020 09:55:39
