Precision Air
V5
Inflator
Instruction Sheet
Setting the Precision Air Inflator
Size Setting Chart
1 Precision Air Inflator
1 Power Cord
1 Foot Pedal
1 Carrying Case
2 Latex Outlets
2 Extension Tips
Precision Air Inflator Includes:
READ PRIOR TO USE:
1.
To prevent the risk of electrical shock, do not use the Precision Air Inflator outdoors when weather
conditions are wet. Never operate unit on a wet floor or work area.
2.
Prior to plugging the Precision Air Inflator into an electrical outlet, verify that the electrical rating
(listed on the label on the back of the Precision Air Inflator) is suitable for the outlet. The Precision
Air is not recommended for use in countries where electrical current is not consistently regulated.
3.
Allow the unit to fully exhaust the air through the vent located on the bottom of the Precision Air
before tapping the foot pedal to begin the next cycle.
4.
Operate the Precision Air in a temperature controlled environment. When working outdoors,
keep the unit out of direct sunlight. Avoid operating unit outdo ors in extremely hot weather. If the
unit reaches temperatures that exceed normal working conditions, the thermal shut-off control will
automatically shut the system down.
5.
If the Precision Air Inflator malfunctions or is damaged in any way discontinue use and unplug unit
from electrical outlet. Contact an authorized Conwin Service Center for details on how to receive service.
Never attempt to repair the Precision Air Inflator yourself. Opening the Precision Air Inflator case will
automatically void manufacturer warranty. Contact an authorized Conwin Service Center for all repairs.
Extension Tip
Foot Pedal
Digital Settings
Latex Outlet
To attach the outlets, firmly press on to each
filling port.
Plug the foot pedal into the side of the unit.
Plug the power cord into the side of the unit and into an electrical
outlet. (A power strip with a surge protector is recommended.)
The digital display will appear when unit has power.
Reference the Size Setting Chart (Fig 1.0) to set
the Precision Air for the proper balloon size. Set
the appropriate number of Seconds by pressing
the arrow buttons on the left side of the control
panel digital display window.
Set the appropriate number of Tenths of a Second
by pressing the arrow buttons on the right side of
the control panel digital display window.
The following settings should be used as guidelines
for the Precision Air. Please note that size settings
will vary based on user preference, balloon color,
manufacturer and from unit to unit. To adjust the
size of balloon to your individual preference it is
necessary to inflate test balloons.
BALLOON SIZE
APPROX. TIME SETTING
5
"
BALLOON
0.8 SECONDS
9
"
BALLOON
1.5 SECONDS
11
"
BALLOON
2.5 SECONDS
16
"
BALLOON
8 SECONDS
1
1
2
2
3
