Convotherm CONVOVent min, Operating, Installation And Service Manual

Page: 48 / 60

Preparing for first-time use, taking out of service and disposal
CONVOVent mini / mini 2in1 48
Overstressing your body
Risk of injury from lifting incorrectly
If a single person tries to lift the appliance by himself/herself, the weight of the appliance may lead to
injuries, especially in the area of the torso.
 When lifting the appliance, use suitable lifting gear or enough people for the weight of the appliance
(guide value: 15 to 55 kg max., depending on age and gender).
 Observe the local occupational safety regulations.
►
Procedure for preparing the appliance for first-time use
Meaning
This section is intended for personnel who will prepare the appliance for first-time use. It summarizes
what requirements must be met prior to putting the appliance into use, and describes the procedure for
preparing the appliance.
Checks prior to preparing the appliance for first-time use
Before preparing the appliance for first-time use, check that the following requirements are met:
 The appliance has no signs of damage.
 The appliance has been set up so that it cannot slide about or tip over; the requirements for the
installation position and the area around the appliance have been met (see section Moving and set-
ting up the appliance on page 33).
Protective films, cardboard packaging and transport securing devices etc. have been removed
completely.
 The appliance is installed in accordance with the requirements in the section Connecting up the
appliance on page 40.

All safety devices are in their designated position and are working correctly.
All warning signs are in their designated position.
The appliance must not be put into service unless all the specified requirements are met.
First-time use
To operate the hood for the first time, follow the steps below:
Step Action
Danger:
Do not, under any circumstance, put into operation damaged appliances or appliances without a
cover.
1 Switch the hood on with the ON/OFF switch.
2 Check that all the fans in the hood are running.
3 The hood is now ready for use.
Customer guidance and instruction.
Instruct the user in all safety-related functions and devices. Instruct the user in how to operate the
appliance.