Convotherm CONVOVent min, Operating, Installation And Service Manual

Page: 21 / 60

For your safety
CONVOVent mini / mini 2in1 21
Cleaning
When cleaning the appliance, be aware of the following hazards and take the specified preventive
actions:
Hazard Where or in what situations
does the hazard arise? Preventive action Safety device
Risk of electric shock
caused by a short-circuit Outside the hood

Do not clean with water jet

Disconnect the combi steam-
er from the power supply
before cleaning the hood
None
Risk of electric shock from
live parts Under the cover Check safety device Cover
A risk of burns from hot
surfaces Inside the case

Allow to cool down before
cleaning

Wear personal protection
equipment
None
Risk of mold formation due
to inadequate cleaning Outside the hood Clean regularly in accordance
with the cleaning schedule None
Risk of skin and eye
irritation or chemical burns
from contact with cleaning
agents During all cleaning tasks Wear personal protection
equipment None
When corrosive cleaning agents
are used

Only use common household
cleaning agents

Wear personal protection
equipment
None
Risk of injuries from
rotating fan Inside the holding chamber

Check safety device

Disconnect from the power
supply before cleaning
Safety grill
Risk of cuts from sharp
edges Outside the hood

Exercise caution when
performing these tasks

Wear personal protection
equipment
None
Installation, service, and repairs
When installing, servicing and repairing the appliance, be aware of the following hazards and take the
specified preventive actions:
Hazard Where or in what situations
does the hazard arise? Preventive action Safety device
Risk of injury from over-
stressing your body When moving the hood Only with enough people or
appropriate tools None
Risk of crushing from hood
falling down When the hood is not secured on
the combi steamer Screw-fix to the combi steamer Securing with
fixing screws
Risk of crushing from the
combined units falling over When fitting a hood to a combi
steamer

Check that the combined
units cannot tip over

Ensure that they are fitted on
a horizontal and flat surface
None
Risk of injuries from
rotating fan Inside the holding chamber

Check safety device

Disconnect from the power
supply before carrying out
installation and maintenance
tasks
Safety grill
Panel
Risk of electric shock
because no equipotential
bonding Outside the hood Incorporate hood in an equipo-
tential bonding system Equipotential
bonding system