Manual CC 5455 IR
22
o
Privacy: Hide an area so that it is not displayed on the monitor.
- When the Special menu screen is displayed, press the Up and Down buttons so that the
cursor points to PRIVACY.
- Set up using the 4 directional buttons.
* AREA SEL: Up to 8 areas are selectable.
* AREA MODE: Determines whether to use the area selected in the AREA SEL, and the size
and position of the area.
* MASK COLOR: Determine area color. Select Grey, Green, Red, Blue, Black or White.
* TRANSP: Determine the transparency of the selected area, the range is from 0 to 3.
* RETURN: Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
o
DIS (Digital Image Stabilizer): This function mitigates picture movement caused by external
factors, such as wind.
o
COMM Adj. (Communication Adjustment): This function sets up the camera communication
status when controlling the camera through an external device.
- When the Special menu screen is displayed, press the Up and Down buttons so that the
cursor points to COMM ADJ.
- Set up the mode using the 4 directional buttons.
* CAM ID: Determines the camera's identification number (between 0 and 255).
* BAUD RATE: Select 2400/4800/9600/19200/38400/57600 bps.
* UART MODE: Select NONE, EVEN or ODD for the parity bits.
* RET PKT: Determines whether to send a command back to the controller device when a
communication control command is sent to the camera.
* DISP CAM ID: Display the camera title on the top left corner of the screen.
o
Language: Select the appropriate menu language.
o
Reset: Rests the camera settings to the factory defaults.
o
Return: Select this to save the Special menu settings and return to the Special menu.
EXIT
Press the Set button in the EXIT menu to save the current settings and exit the SET menu.