background image

Connection and Installation

The DC adaptor power unit should not be plugged into a wall outlet until all connections 
are complete.

-

Using your connector cable connect the output port (Number 3 on the rear panel) to 
the output device (Video, TV). 

-

Using your connector cable connect the input port (Number 1 on the rear panel) to the 
input device (video, satellite receiver, camcorder). 

-

Select the video input system; you may select AUTO, N3, N4, PAL, PAL M, PAL N 
or SECAM. When an input signal has been chosen, the indicator will light up.

-

Select the video output system; you may select N3, N4, PAL, PAL M or PAL N or 
SECAM. When an output signal has been chosen, the indicator will light up.

-

If you would like to synchronize two video inputs, connect the genlock to your video 
source and the output of the unit will automatically turns itself into the same system 
and synchronization as the Genlock. You must connect the genlock out of one unit to 
the genlock in of another unit. When the Genlock is not connected the unit works as a 
video converter.

Once all connections are complete please connect the power supply provided to the 
power socket.

Specifications

Input connection terminal

2 x Video, 2 x S-Video, 2 x Audio (R, L)
Genlock input: 1 composite

Output connection terminal

1 x Video, 1 x S-Video, 1 x Audio (R, L)
Colour difference (Y, R-Y, B-Y) x 1.
Genlock output: 1 composite

Input TV systems

NTSC 3.58, NTSC 4.43, PAL (M, N), 
SECAM.

Output TV systems

NTSC 3.58, NTSC 4.43, PAL (M, N).

Sampling frequency

Y:13.5 MHz 
R-Y:6.75 MHz 
B-Y:6.75 MHz 

Digital Cord Bit

Y: 8 Bits, R-Y: 8 bits, B-Y: 8 Bits

Line conversion

525 to 625 lines and vice versa 

Field conversion

60 to 50 fields and vice versa

Power Supply

DC 15V 600mA Center negative

Dimensions

300 (W) mm X 242 (D)mm X 55 (H)mm

Weight

2.0 Kg

Accessory

One 3-pin A/V cable, S-VHS cable, DC 
adaptor.

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia, 

[email protected]

Phone +61 249689313   Fax +61 249689314

www.converters.tv

Summary of Contents for CDM-830T-BNC







Reviews: