•
Output system select button
Each depression of the button steps through a series of video systems. The sequence is-
N3- N4- PAL (BDGI)- PAL M- PAL N- SECAM.
•
Picture adjustment indicators-
1.
Contrast indicator-
When it lights up, use + and – buttons to adjust the picture
contrast.
2.
Brightness indicator-
When it lights up, use the + and – buttons to adjust the picture
brightness.
3.
Colour indicator-
When it lights up, use the + and – buttons to adjust the picture
colour.
4.
Tint indicator-
When it lights up, use the + and – buttons to adjust the picture tint.
5.
When both contrast and brightness light up,
use + and – buttons to adjust
horizontal phase of the TBC input (against Genlock input).
6.
When both colour and tint light up,
use + and – buttons to adjust the vertical phase
of the TBC input (against Genlock input).
•
Picture adjustment controls-
1.
Select-
Press this button repeatedly to choose what picture adjustment you wish to
do. Each depression of the button will lead to a change on the controls as follows-
Contrast- Brightness- Colour- Tint- TBC (H)- TBC (V).
2.
+ Button-
Press this button for adding picture effect value.
3.
– Button-
Press this button for decreasing the picture effect value.
4.
+ And – button- Press + and – simultaneously
, the setting of the selected control
will be reset to its default value.
Press + and –
simultaneously for over 3 seconds, all
controls will be reset to their default values.
•
Input Indicator-
1. Input 1 illuminates when input 1 is selected.
2. Input 2 illuminates when input 2 is selected.
•
Input Selector
Press the button to select the wanted input source from the two inputs.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
