Operation Controls
and Functions
Front panel
1.
Power LED
The LED will illuminate green when the device is connected to a power
supply.
2.
IR receiver
IR receiver window receives IR commands from the supplied remote
control.
3.
SDI Input select/Indicator LEDs 1~4
Press the input button repeatedly to cycle through the SDI input sources,
the red LED will illuminate to indicate which input source is currently
selected. When the device is in 'Standby' mode, press this button to
power on the device.
4.
SDI OUTPUT
Connect to up to two SDI TVs or monitors for mirrored display or to
second splitter to cascade the SDI signal to multiple displays or devices.
Rear Panel
1.
SDI INPUT
Connect up to four SDI source devices such as a video camcorders or SDI
players. Accepts SD,HD or 3G SDI signals.
2.
RS-232
Connect to a PC/laptop or RS-232 enabled device with a D-Sub 9-pin
cable to control the unit with RS-232 commands (refer to Section 6.3 'RS-
232 Protocols') .
3.
DC 5V
Plug the 5V DC power supply into the unit and connect the adapter to
AC wall outlet.
