Introduction
The 3G-SDI 4 by 2 Switcher/Splitter allows SD-SDI, HD-SDI and 3G-
SDI signals to be switched from up to four SDI sources and split
to two SDI outputs while ensuring high bit rates of 2.970 Gbit/s to
give you high bandwidth signal transmission without signal loss
over long distances and can be controlled via IR or RS-232.
System
Requirements
SDI source inputs (such as broadcast video cameras or recording
device) and SDI output displays (such as TVs or monitors).
Applications
●
Video broadcasting display
●
Professional video program display
●
Film studios program monitoring
●
Video program switching display
Features
●
Switch between four 3G-SDI input sources and split the
output to two 3G-SDI displays simultaneously
●
Operation at 2.970 Gb/s, 2.970/1.001 Gb/s, 1.485 Gb/s,
1.485/1.001 Gb/s and 270 Mb/s
●
Supports SMPTE 425M (Level A and Level B), SMPTE 424M,
SMPTE 292M, SMPTE 259M-C
●
Provides equalized and re-clocked transmission
●
Control via RS-232, IR remote control (supplied) and on-panel
buttons
●
Supports signal input and output distances of up to 300 m for
SD signals, 200 m for HD signals and 100 m for 3G signals.
Note:
Tested with Belden 1694A Cable. Operating distances
may vary if used with cables of different specifications.
