•
3D noise reduction.
•
Operates through on-screen OSD menu control and remote
control.
Operating Functions
and Controls
Front Panel
1. Power:
Press the button to turn ON or turn OFF (standby) the power of
the unit.
2.
+/-
button:
The buttons provide 3 functions:
a. Input select ("+"):
Press the "+" button repeatedly to select your
desired input source. The input sources are-toggled through in the
following sequence.
b. Auto Tune ("-"):
Press the "
2
button to carry out picture auto adjust for analog
inputs (component or PC). The
HDMI Digital scaler with ultra high
bandwidth
will fine tune the position (centering) and color of the output picture.
c. When in the OSD menu mode:
Press the +, - button to move up or
down the highlight bar to your desired parameter. Or once a parameter is
selected with MENU/Enter button, press the button to adjust setting value of
your selected parameter.
3. Menu/Enter:
This button serves two purposes.
a. Press the button to bring up OSD main menu as shown in the
"OSD Operation".
b. To act as a "Enter" key to enter sub menu or to adjust setting value of the
selected parameter.
4. Input LED Indicators:
When one of the LED illuminates its corresponding
source is being selected as input.
5. IR Sensor:
Infrared remote control sensor.
6. Audio L/R Input:
Stereo audio input associated with component in.
7. Component Input:
Connects this input connector to the Component
output connector of your source equipment using the enclosed 3RCA to
3RCA cable. The
HDMI Digital scaler with ultra high bandwidth
