5. HDMI/DVI input:
Press the button to directly select DVI (or HDMI)
input.
6. Output resolution:
Select buttons:
Press any one of the button to directly
select output resolution. For other output resolutions that are not
covered by these buttons please enter Menu/Output page to select
them
7.
.
MENU:
Press the button to bring up OSD main menu page.
8. Exit:
Press the button to exit from a sub menu or main menu.
9. Up/Down/Left/Right:
Press the Up/Down button to move the
highlight bar to your desired parameter during the OSD operation.
Press the Left/Right button to increase/ decrease the setting value of
a selected parameter.
10. OK (Enter):
Press the button to confirm your selection.
11. Reset:
Press the button to reset the unit's firmware setting to the
factory default value.
12. Auto Adjust:
Press the button to optimize the position of the picture
(picture centering) on the screen.